Analog 110 Volt Timer
Rely on the 120-volt Blueprint Controllers® Mechanical Timer, BMT-1 to keep garden electronics running on schedule. It is programmable in 15-minute increments and features a power indicator and switch. This timer handles a maximum load of 1,875 watts and 15 amps, and it is protected by a one-year warranty.
Analog Timer 24 Hour 240 volt
The Apollo® 10 - 240 Volt/24 hour timer is the perfect timing solution for your hydroponic systems. With a 10 amp capacity, it's easy to set to run your pumps, fans, etc. The Apollo® 10 has 96 non-detachable 15 minute trippers and can be configured in numerous timing schedules. One (1) outlet with 15 minute intervals. Heavy duty construction that is easy to use & simple to operate. Plastic enclosure resists dust, rust and moisture. Only the highest quality components are used. Not for use with digital ballasts. 10 Amps maximum/240 Volts/60 Hz.
Blueprint BCT-1 Cycle Timer
The ETL listed Blueprint Controllers® Cycle Timer, BCT-1 controls a pump, fan or other 120-volt device with adjustable on/off cycles. A built-in photocell control permits day, night or 24-hour operation. Precise timer set points facilitate an on time range of 15 seconds to five hours and an off time range of 15 seconds to 13 hours. This timer includes a three-year warranty.
Digital 110 Volt Timer
Rely on the single output, 120-volt Blueprint Controllers® Digital Timer, BDT-1 to keep any 120-volt appliance running on schedule. This digital timer is fully grounded, accurate to the second and 24-hour programmable for every day of the week. It can be programmed with up to eight different on/off cycles per day with a minimum cycle of one minute and a maximum of seven days. The UL listed digital timer handles 15 amps and 1,725 watts, and it comes complete with alarm and clock, a clear LCD readout and a one-year warranty. It also includes an NiMH battery that recharges automatically when the unit is plugged in.
Digital 240 Volt Timer
The 240-volt Blueprint Controllers® Digital Timer, BDT-1C features a grounded outlet that can handle any 240-volt gadget up to 3,600 watts and 15 amps. This timer allows up to 20 programmable on/off cycles per week, and the cycles are adjustable to the minute on any of the seven days in a week, meaning that complex regimens can be maintained even if the device is unattended for several days. It also features countdown and randomize functions, 24-hour or AM/PM time display and a power indicator and switch. For added peace of mind, a rechargeable NiMH battery stores settings in case of power loss, and the unit is protected by a one-year warranty.
Dual 110 Volt Analog Timer
The 24-hour, 120-volt Blueprint Controllers® Mechanical Timer, BMT-2 is fully grounded and simple to use. Because the timer features two outlets, it can simultaneously accommodate a light system and a small fan or other device. The mechanical timer handles a maximum of 1875 watts and 15 amps, and can be programmed in 15-minute increments. It is protected by a one-year warranty.
Sun Dial 8 Power Strip/Timer
The ETL listed Sunleaves SunDial8 Mechanical Timer keeps multiple devices powered and running on schedule. Each unit features four constant power receptacles and four receptacles that can be programmed in 15-minute increments via the 24-hour timer. The SunDial8 has an integrated circuit breaker, 6-foot power cord and a one-year warranty, and its maximum load is 1,875 watts, 15 amps and 125 volts.
Timer Digital Dual 110 volt
Excellent for running hydroponics systems, lighting equipment, pumps and more, the 24-hour programmable Blueprint Controllers® Digital Timer, BDT-2 runs two devices on the same schedule. The UL listed digital timer features a large LCD readout and integrated circuitry that can handle up to 15 amps and 1725 watts.